Artemmka`s Xedos 6 2.5 V6 KL. Riga

[Artemmka]

I know that it is possible without any large changes, put from MPS 6 also.
But i can`t find here in Latvia any MPS for parts. New are too expensive.

[Eddyk]

Have you take only Brakedisc from Mazda 6 or the brake system?

[Artemmka]

Zitat von Eddyk

Have you take only Brakedisc from Mazda 6 or the brake system?

Please look. I changed only.

Zitat von Artemmka

Front brake calipers of Mazda 6 I generation 2.0 -2.3 l.Also brake pads.
Front discs of Mazda 6 I generation 2.0 -2.3 l

My future plans, to check if it is possible to put main brake cylindr and vacuum from 6256 GF or Premacy.

[Eddyk]

Zitat von Artemmka

My future plans, to check if it is possible to put main brake cylindr and vacuum from 6256 GF or Premacy.

Brake System is the same, only the ABS ECU is another than xedos, by premacy i dont know.

[Artemmka]

Zitat von Eddyk

Brake System is the same, only the ABS ECU is another than xedos, by premacy i dont know.

Probably, but i compared 626 GE and X6, they are a little bit different.
Premacy should be as 626 GE, as i know the same platform.

[w00lf]

Zitat von Artemmka

Probably, but i compared 626 GE and X6, they are a little bit different.
Premacy should be as 626 GE, as i know the same platform.

Platform of Xedos 6 = platform of 626 GE.
Shouldn't be different.

regards

[wirthensohn]

Same platform does not mean identical brakes and completely identical parts.

Ok, 626 GE, Xedos 6, MX-6 and Ford Probe II are using the same platform, the same technic, same engines - but there are a lot of differences in detail.

And no, Premacy does not use the GE-platform.

Gruß,
Christian

[Artemmka]

Sorry, didn`t write till the end.
I meant that 626 GF = Premacy = 323 BJ

[Artemmka]

Today took rebuilded heads.
Was made:
1. polished surface
2. new valve guides on exhaust valves
3. polished valves
4. valves and valve seats were machined. Made stock angles. Tested by vacuum.
5. i washed heads using karcher with 100`C temperature

[Artemmka]

All Saturday spent for cleaning.
Take a look.
I`ll polish them with aluminium paste later.